Eine wichtige Verbindung für Geomembranen, um ihre Anti-Sicker-Wirkung zu entfalten

Die Qualität derGeomembranselbst ist für den Sicherheitsschutz des Flussufers sehr wichtig. Beim Transport von Geomembranen darf diese die Umwelt nicht schädigen oder verschmutzen und ein längerer Kontakt sollte vermieden werden. Prüfen Sie vor dem Betreten der Baustelle, ob die Spezifikationen und Modelle der Dichtungsbahn den baurechtlichen Vorschriften entsprechen. Für jede Charge Geomembran, die auf der Baustelle ankommt, müssen Ingenieure Qualitätsprüfungen durchführen und dürfen erst nach bestandener Prüfung auf der Baustelle verwendet werden.






When laying the membrane, it should be carried out in strict accordance with the drawing design and standard regulations, and the dirt and debris on the lower base mat should be removed first to prevent these dirt from damaging the geomembrane. During the entire film laying process, ensure that the film surface is flat, free of wrinkles, and the tension level is well controlled. In addition, pay special attention to the actual operators on site not to wear hard-soled shoes. The joint decomposition is a key step for the geomembrane to fully exert its impermeability function. If the joints are not handled properly, not only will it not serve as a waterproof layer, but the water quality will continue to enter. According to the gap at the bottom of the membrane, the key to the lap joint of the geomembrane is the adhesive, and the joint is removed before bonding. After cleaning the adhesive, it is dried and cured by laminating technology. Under normal circumstances, the overall width of geomembrane bonding should be controlled within 10 cm, and inspection should be carried out immediately after bonding. After confirming compliance with the standards, construction can begin. In addition, after the pavement is overlapped with the steel bars, it must be covered with the thickness of the upper protective layer immediately to avoid damage caused by external factors.